Pick your project, enter a rough amount, and get an estimated size, price, and weight range based on published Knoxville prices.
| Size | Starting price | Weight included | Rental days | Approx. volume |
|---|---|---|---|---|
| 10-yard | $275 | 2 tons | 7 days | about 3 pickup truck loads |
| 15-yard | $325 | 2 tons | 7 days | about 4 to 5 pickup truck loads |
| 20-yard | $375 | 2 tons | 7 days | about 6 pickup truck loads |
| 30-yard | $475 | 3 tons | 7 days | about 9 pickup truck loads |
Extra days are $15 per day and weight over the allowance is $85 per ton. Item fees and material rules are on the pricing page. The final quote confirms availability and terms.
In Knoxville, the published starting price runs from $275 for a 10-yard dumpster to $475 for a 30-yard dumpster. Two things decide what you actually pay: the container size you need for the volume, and whether the load weighs more than the tons included in that price. The calculator above works through both.
Most cleanouts are limited by space, not weight. Furniture, boxes, and household items are bulky but light, so a full container often stays under its allowance. Remodel debris, roofing, and concrete are the opposite. They can reach the weight allowance well before the container looks full, and that is where overage charges come from.
Volume. For most projects you enter pickup truck loads. Our size pages put a 10-yard at about 3 pickup loads and a 30-yard at about 9, so the calculator counts one load as about 3.3 cubic yards. It then picks the smallest size that holds that volume and flags it if the load is close to full.
Weight. Cubic yards are multiplied by a low and high debris density. Those figures come from the U.S. EPA's 2016 Volume-to-Weight Conversion Factors: for example, about 150 to 300 lb per cubic yard for loose household waste, 417 to 484 lb for mixed construction and demolition debris, 169 to 268 lb for wood, and 127 to 250 lb for brush and yard waste. Dividing by 2,000 gives tons.
Roofing. Shingle weight is estimated per square (100 square feet) per layer: roughly 200 to 250 lb for 3-tab and 250 to 400 lb for architectural shingles. These are typical ranges, not a manufacturer figure, so check your bundle labels if you want a closer number. A 25-square, one-layer 3-tab roof works out to about 2.5 to 3.1 tons.
Concrete. Slab area times thickness gives cubic feet, at about 145 lb per cubic foot. Concrete is heavy enough that even a small patio can pass the allowance, which is why concrete, dirt, brick, and shingle loads are quoted by phone.
Overage. Any estimated weight above the included tons is multiplied by $85 per ton. The calculator also shows the next size up, which matters most for heavy loads because the 30-yard includes 3 tons instead of 2.
Not sure which size fits? Read the guides for garage cleanouts, kitchen remodels, roofing, and yard waste.
Call for current availability and a complete written quote for your Knoxville project.